Code Alarm Manual

Saturday, October 1st, 2011 | Car Electronics

code alarm manual

Mobiles Secret Codes Magic

Siemens Mobile Secret Codes:

C25:
SP unlock *#0003*(secret code 8 digits)#
*#0606# shows you Secret Code, but only without SIM Card.
*#06# for checking the IMEI (International Mobile Equipment Identity)
Resets language to automatic selection : * # 0000 # then Green button

Pin Out (electrical connections)
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO

Languages:
*#0000#+green phone – choose automaticaly
*#0001#+green phone – English
*#0030#+green phone – Greek
*#0031#+green phone – Netherlands
*#0032#+green phone – French
*#0034#+green phone – Spanish
*#0039#+green phone – Italian
*#0049#+green phone – German
*#0090#+green phone – Turkish

How to change PIN:
**04*old PIN*new PIN*new PIN#

How to check simlock status
*#0606# and then press left soft-key, you will see strange characters, then text (“brak blokad”). If you see for example 260-02, it means the phone is locked to Era GSM. In older models you can use *#06# and see the same information after clicking on left key (you will see IMEI and software version).

S4:
Monitor Mode – how to activate:
Press left soft-key, then 9 (SET UP) 8 (Phone Status). You will see IMEI number, then press left soft-key and in order 7684666 and red phone at the end (monitor mode has been activated). To read information from Monitor Mode – press left soft-key, then 5 (GSM SERVICE) and 6 (Monitor). Monitor mode turns off when you switch off the phone. You must activate it again if you want.

How to see date of software:
Press left soft-key, then 9 (SET UP) 8 (Phone status). You will see IMEI number, then press twice left soft-key, 98, left soft-key, 7684666, red phone (activates Monitor Mode), left soft-key, 56 (turns on Monitor Mode), left soft-key, 98, left soft-key, 7684666, hang up (red phone) >abck to “normal” and then left soft-key, 56.

S6, S8:
If you add to phonebook under ‘own phone number’ +12022243121 with namez (for example MMI), then you will see something smile.gif

S10, E10:
In phonebook enter +12022243121 as your own phone no. You will see a picture with sun, two palms and greetings.

S15e:
Monitor Mode:

Code: *#7436267*8378# (*#SIEMENS*TEST#)
Hold red phone button until it code disapears.
Menu 3.3.4 Choose frequency.
Menu 3.3.4.1 Automaticaly.
Menu 3.3.4.2 Choose GSM-900
Menu 3.3.4.3 Choose GSM-1800
Menu 10.1 MS info
Menu 10.2 Soft date
Menu 10.2.1 Software version.
Menu 10.2.2 EEProm version.
Menu 10.3 Tst and product info.
Menu 10.3.1 Handware data.
Menu 10.3.2 Date of manufacture
Menu 10.3.3 Service date
Menu 10.3.4 Date of repair.

S25:
Enhanced Full Rate
*#3370# turns on
#3370# turns off

Haft Rate Mode
*#4720# turns on
#4720# turns off.

How to change PIN2?
**04*old PIN2*new PIN2*new PIN2#

What is my software version?
Menu 8-8-2 press left-softkey when you see IMEI number, or *#06# and then green phone button and then press left soft-key.

How to extend battery life:
IrDA – turn on only when you need.
Turn off automatic network search (6-3)Turn off Vibration alarm.

SP unlock *#0003*(secret code 8 digits)#
*#0606# shows you Secret Code, but only without SIM Card.
*#06# for checking the IMEI (International Mobile Equipment Identity)
Resets language to automatic selection : * # 0000 # then Green button

S25, M35, S35, C35
SP unlock *#0003*(secret code 8 digits)#
*#0606# shows you Secret Code, but only without SIM Card.
*#06# for checking the IMEI (International Mobile Equipment Identity)
Resets language to automatic selection : * # 0000 # then Green button

Secret Codes Of Nokia Mobiles:
Below we present secret codes of nokia mobile phones which are very useful for people who unlock phones and for amateurs of this topic. These special key sequences entered fromkeyboard of phone allow you to get some important information like IMEI number, release date, software version and much more. You can also choose default language, activatenetmonitor ect.

1610/1630
*#170602112302# (software version)

1610/1611
IMEI number: -*# 0 6 #
Software version: -* # 1 7 0 6 0 2 1 1 2 3 9 2 #
Simlock status: – # 9 2 7 0 2 6 8 9 #

2110
*#9999# (software version)
2110i/2110e
*#170602112302# or (depends on model)*#682371158412125# (software version)

NOKIA3110
*#06# -IMEI
*#3110# -Software version
##002# – allows to turn off voice mail.
*#7780# – restore factory settings
*#746025625#(or *#sim0clock#) – to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is akind of standby mode which saces battery)
*#92702689# (or *#war0anty#) -”warranty code:”- you have to enter one of the following codes:

6232 (OK)displays month and year of production date (ie “0198″)
7332 (OK) – displays date of last repair – if there is (ie. “DATE NOT SAVED”)
7832 (OK) – displays date of purchase – if there is (ie. “DATE NOT SAVED”)
9268 (OK) -displays serial number
37832 (OK) -sets purchase date in format MMYY (MM – month, YY – year)- attention: you can set it only once, so beware !
87267 (OK)-displays message “Confirm Transfer?” – meaning is unknown (?)

* # 9 2 7 0 2 6 8 9 # -Simlock info
*#31# (call) -sets if your phone no. will be hidden or not (works only in some networks)
*#76# (call) -sets if target phone number when you call should be displayed (works only in some networks)
*#77# (call) -(work s only in some networks)
*#33/35# (call -displays message “Service not active”.
**31# (call) -your no. will not be showed to others when you make a call

3210
*#06# -IMEI
*#0000# -software version
*#92702689# (or *#war0anty#)- enters service mode.

*3370# -Turns on sound encoding system – Enhanced Full Rate.
#3370# -Turns off sound encoding system Enhanced Full Rate .
*4720# -Turns on battery save mode – saves about 30 % of energy.
#4720# -Turns off battery save mode.
xx# -Replace xx with desired phonebook entry – press # and you will see it on display.

51XX
*#06# -IMEI
*#0000# – Software version
*#92702689#( or *#war0anty#) Enter service mode.

*3370# -Turns on sound encoding system – Enhanced Full Rate.
#3370# -Turns off sound encoding system – Enhanced Full Rate.
*4720# -Turns on battery save mode – saves about 30 % of energy.
#4720# -Turns off battery save mode.
#pw+1234567890+1 -provider lock status
#pw+1234567890+2 -Network lock status
#pw+1234567890+3 -Provider lock status
#pw+1234567890+4 – SimCard lock status

NOKIA 61XX
*#06# -IMEI
*#0000# ;-*#99 99# (Nokia 6130)
*#92702689# (or *#war0anty#) Software versionEnter service mode.
*3370# -Turns on sound encoding system – Enhanced Full Rate.
#3370# -Turns off sound encoding system – Enhanced Full Rate.
*4720# -Turns on battery save mode – saves about 30 % of energy.
#4720# -Turns off battery save mode.

NOKIA8810
*#06# – IMEI
*#0000# -Software version
*#92702689# (or *#war0anty#) Enter service mode.
*3370# -Turns on sound encoding system – Enhanced Full Rate.
#3370# -Turns off sound encoding system – Enhanced Full Rate.
*4720# -Turns on battery save mode – saves about 30 % of energy
#4720# -Turns off battery save mode – saves about 30 % of energy

NOKIA99OO
*#06# -IMEI
*#682371158412125# -Software version
*#3283# -Displays week and year of manufacture, ie. 1497 means 14th week of 1997.

NOKIA 911O
*#06# IMEI
*#0000# SOFTWARE VERSION
*3370# Turns on sound encoding system – Enhanced Full Rate.
#3370# Turns off sound encoding system – Enhanced Full Rate.
*4720# Turns on battery save mode – saves about 30 % of energy.
#4720# Turns off battery save mode.

NOKIA 81XX
*#06# IMEI
*#8110# Software version
xx# Replace xx with desired phonebook entry – press # and you will see it on display

*#92702689# (or *#warOanty#)
“Warranty code:” – you have to enter one of the following codes:
9268 (OK) displays IMEI (International Mobile Equipment Identification)
6232 (OK) displays date of manufacture in format MMYY (MM – month, RR – year)
7832 (OK) displays date of purchase
7332 (OK) displays date of repair or upgrade
37832 (OK) sets date of purchase in format MMYY (MM – month, RR – year) – attention: you can set it only once, so beware !!!
87267 (OK) transmits user data/move data do service PC

Motorola Codes:

Motorola 920
—————
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

The 54# Tip:
Type 1#, 2#……..54# on the keypad (when you’re not in the menu) to get the phone number used for with this key when speed dialing.

Motorola 930
————–
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

Motorola 930
The 54# Tip:
Type 1#, 2#……..54# on the keypad (when you’re not in the menu) to get the phone number used for with this key when speed dialing.

Motorola 6200
————–
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:
UK (Orange)
AU

Get Signal Quality – press [MENU] until ‘Eng Field
Option’ is displayed, press [OK], select ‘Active Cell’,
press [OK], press [MENU] until ‘C1′ appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs
Numbered left to right, keypad up, battery down
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink – Complimentary data (CD) (input)
5. Uplink – Return data (RD) (output)
6. GND
7. Audio Out – on/off
8. Audio In
9. Manual Test – ???
10. Battery Feedback
11. Antenna connector

Motorola 7500
————-
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:
IT (model: F16 HW: 5.2 SW: 2.1)

Pin Outs
Numbered right to left, keypad up, battery down looking
1. Gnd
2. Pos
3. True data (TD) (input)
4. Complimentary data (CD) (input)
5. Return data (RD) (output)
6. Audio gnd
7. Audio out
8. Audioin

Motorola 8200
————–
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:
ES, AU, NL, BE

What’s the use of RBS:
Get Distance From Base Station – Place a call, when it
is answered, press [MENU] until ‘Eng Field Option’ is
displayed, press [OK], select ‘Active Cell’, press [OK],
press [MENU] until ‘Time Adv xxx’ appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.
Get Signal Quality – press [MENU] until ‘Eng Field
Option’ is displayed, press [OK], select ‘Active Cell’,
press [OK], press [MENU] until ‘C1′ appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs
Numbered right to left, keypad up, battery down looking
1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink – Complimentary data (CD) (input)
5. Uplink – Return data (RD) (output)
6. GND
7. Audio Out – on/off
8. Audio In
9. Manual Test – ???
10. Battery Feedback
11. Antenna connector

Motorola 8400
————-
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:
ES, AU, NL, BE

Motorola 8700
————–
*#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:
AU, IT, SG, DE, ES, ZA

Motorola CD 160
—————
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

Motorola CD 520
—————-
Press menu and type one of these numbers and press OK:
11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip
1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

Motorola d460
————–
#06# for checking the IMEI (International Mobile Equipment Identity)

De-activate RBS
To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

Motorola V3688
—————
#06# for checking the IMEI (International Mobile Equipment Identity)

Enhanced Full Rate Codec (EFR):
To Enable EFR press [][][] 119 [] 1 [] OK.
To Disable EFR press [][][] 119 [] 0 [] OK

NOTE: Nothing appears on Screen.

Ericsson Mobile Secret Codes:

T10
*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

Shortcut for Last Dialed call menu
If you for some reason don’t want to enter the ‘Last Dialed calls menu’ by using the ‘YES’ key you can use the following key
stroke instead: First ’0′ then ‘#’.

Access menu without Sim card
To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say “Wrong Pin” press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and youŽll have to take your battery out to turn the phone on again. And this will not care about Phone lock!
A way to (un)lock your Cell Phone on to the network(subset):
1. Press <**<
2. Then on the display appear and give you two choices: Lock to Network ? and Lock to Network subset? (Use arrow keys to select)
3. Enter the NCK number (code is provided by the SP)
4. You have 5 attemps to do this
5. Then your cell phone will work ‘only’ with the network

Warning: The Service Provider (SP) Lock menu is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response “Not allowed”! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Message Report
When you writing a message, place at the start of it the code *0# and continue with your message. It’s job is like nokias report. It gives you information about the sended message.

T18
*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

To access SIM-Locking menu of your phone, press: < * [CLR] <
Be careful or you may lock your phone.

Message Report
When you writing a message, place at the start of it the code *0# and continue with your message. It’s job is like nokias report. It gives you information about the sended message.

T28
*#06# for checking the IMEI (International Mobile Equipment Identity)
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:
<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response “Not allowed”! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu

If you for some reason don’t want to enter the ‘Last Dialed calls menu’ by using the ‘YES’ key you can use the following key
stroke instead: First ’0′ then ‘#’.

Message Report
When you are writing a message, place at the start of it the code *0# and continue with your message. It’s job is like nokias report. It gives you information about the sended message.

388
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.

>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you… or is it ? in case please let me know!)
<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response “Not allowed”! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu…
If you for some reason don’t want to enter the ‘Last Dialed calls menu’ by using the ‘YES’ key you can use the following key
stroke instead: First ’0′ then ‘#’.

Access menu without Sim card …
To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say “Wrong Pin” press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on the GH688 your phone may stop at Keylock On? menu and youŽll have to take your battery out to turn the phone on again.

GA628
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset the phones menu-language to English.
*#103# then YES Time and date will be shown.
>*<<*<* for checking the firmware revision information (software release)
>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)
>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)

To activate/deactivate this lock one needs a special secret code that is not available to the end user.
Here is how to activate the menu:

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.
<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response “Not allowed”! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Bat. level indicator when turned OFF
When the phone is turned off and the phone is not changing – the bat. level can be seen for a short period of time by pressing the ‘NO’ key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.

Alarm Clock Menu
Go to MissedCall Empty the list Press the -> key for a second or two The option Menu size turns up Choose ‘yes’ and go from there.

An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone.

Free phone calls using the GA628

This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.
The prepaid GSM SIM CARD is a kind of “SIM card” which only has a sertant amount of credit on it (like a normal phonebox telecard)… if it can be traced? – we don’t know…

Well..here’s the trick you dial the no. normally and press YES. While “connecting” is shown on the screen, the following procedure should be carried out: Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!

Another variant of the code

Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.

If you can make the call with the phone turned off you will face a problem when you need to hang up the phone…the only way for you to do that is remove the battery…???

About the Author

My name is “Saurabh Bhartiya“; I am a multimedia and visual effects faculty. Also I am a freelancer, I have design many types of softwares and websites. I have done my graduation in Computers. I am living in Ujjain, (India).I am taking some Online and Offline Home Based tuitions for Business class people as well as professionals too. Now a days, I am teaching online as an online eTutor. I am giving some lectures on C, Foxpro 2.6 (old version), Pascal and Digital Organisation (Based on University Syllabus).

My URL is: http://www.bhartiyacomputers.com

My email address is: saurabh@bhartiyacomputes.com

Price Honda How to Use Your Aftermarket Code Alarm/ Remote Start System PriceHonda.c

Honeywell RCWL300A1006 Premium Portable Wireless Door Chime and Push Button

$31.22

The Honeywell RCWL300A P3 Premium Portable Wireless Door Chime and Push Button makes it easy to replace your home’s generic doorbell ring with a chime tune that better fits your individual style. This chime is also compatible with a wide range of optional security accessories that can help you safeguard your home and family, and it comes complete with a pre-programmed bell push button. .caption …

Honeywell RCWL330A1000/N P4-Premium Portable Wireless Door Chime and Push Button

$47.02

The Honeywell RCWL330A P4 Premium Portable Plus Wireless Door Chime makes it easy to replace your home’s generic doorbell ring with a chime tune that better fits your individual style. This chime is also compatible with a wide range of optional security accessories that can help you safeguard your home and family, and it comes complete with a pre-programmed bell push button. .caption { font-famil…

The Original Cooking Thermometer/Timer by ThermoWorks

$22.99

The TW362B has a robust design and a slide switch so the unit can be powered off. The well-loved simplicity means you won’t need to find the instructions each time you set an alarm. The stylish housing folds the display up for counter use or flat for less obtrusive magnetic mounting to an appliance door. This is a huge kitchen favorite in commercial and home kitchens as well as industrial and lab …

First Alert CO615 Carbon Monoxide Plug-In Alarm with Battery Backup and Digital Display

$32.54

Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you’re in danger at first. That’s why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can’t see, smell or taste i…

Kidde KN-COSM-IB Hardwire Combination Carbon Monoxide and Smoke Alarm with Battery Backup and Voice Warning, Interconnectable

$32.49

Untitled Document .caption { font-family: Verdana, Helvetica neue, Arial, serif; font-size: 10px; font-weight: bold; font-style: italic; } ul.indent { list-style: inside disc; text-indent: 20px; } table.callout { font-family: Verdana, Helvetica, Arial, serif; margin: 10px; width: 250; } td.callout3-c26 { height: 100 percent; background: url(‘http://g-ecx.images-amazon.com/images/G/01/th/detail-p…

Kidde KN-COSM-B Battery-Operated Combination Carbon Monoxide and Smoke Alarm with Talking Alarm

$64.97

Kidde Fire and Safety Nighthawk KN-COSM-B Combo Smoke/Carbon Monoxide Alarm 9000102 301…

Suunto Vector Wrist-Top Computer Watch with Altimeter, Barometer, Compass, and Thermometer

$219.00

An indispensable instrument for outdoor enthusiasts, the Suunto Vector wrist- top computer combines an altimeter, barometer, compass, and thermometer, letting you plan and execute almost any activity with confidence and safety. Regardless of your excursion–whether it’s climbing mountains, riding a muddy bike track, or skiing off piste–you need accurate, real-time information about your surroundi…

Python 991 Responder LC3 SST Security/Remote Start System

$649.99

2-MILE RANGE WITH SST; SLIM 5-BUTTON SST 1-WAY COMPANION REMOTE; PRIORITYTM 5-BUTTON USER INTERFACE WITH EASY 2-CAR OPERATION; CONTROL CENTERTM WITH INTEGRATED STATUS LED & VALET SWITCH; VIRTUAL TACHTM RMP SENSING; D2D SERIAL DATA INTERFACE FOR XPRESSKITTM D2D SERIAL DATA INTERFACE MODULES; XPRESSPORT DOCK FOR XPRESSKITTM DOCKING SERIAL DATE INTERFACE MODULES; ONBOARD FLEX RELAYS FOR REMOTE START …

Viper 474V 4-Button Remote

$19.98

VIPER 474V Viper 4-Button Remote…

XA201 Zone Alarm Lock

$44.99

Xena XA201 Zone Alarm Lock Wall mounted Infrared beam with 20ft. range Ultra loud 130db alarm Code activated with remote key fob

XA601 Zone Alarm Lock

$44.99

Xena XA601 Zone Alarm Lock Ceiling mounted 360? degree protection Ultra loud 130 dB alarm Code activated with remote key fob

XA801 Zone Alarm Lock

$67.99

Xena XA801 Zone Alarm Lock Wall mounted Infrared beam with 20 foot range Easy to program 4 digit code Auto phone dialer for up to 3 pro-grammable phone numbers Ultra loud 110 dB alarm

Delux Alarm Sys(Pack of 1)

$145.75

Delux Alarm Sys. Crimestopper Sp-201 Deluxe Alarm System.Deluxe 1-Way Alarm & Keyless Entry System; 2 Ultra-Slim Style Remote Transmitters; 2-Way Data Port For Easier Installation; Dynamic Code Learning Receiver; Upgraded On-Board Starter Kill Relay For

XX-10 Disc Lock With Alarm

$89.99

Xena XX-10 Disc Lock with Alarm The high-performance XX10. High nickel-content stainless-steel mono-block construction and piercing 120dB alarm. A remarkably effective way to protect your motorbike. Featuring a sport and streetbike-oriented fit profile with 10mm double-locking, carbide-reinforced hardened-steel locking pin. Shock & motion sensors trigger a piercing 120dB anti-theft alarm powered by a single CR2 Lithium battery. Self-arming, with no on-off switch, re-sets automatically to armed mode within 15 seconds. Includes: 1 XENA Disc-Lock 1 CR2 Battery 3 Keys, 1 Metal Key Code Tag Lock Features: 10mm Carbide-Reinforced Pin 100% Stainless Steel Total Corrosion Resistance Double-Locking System Maximum Security Key & Barrel Ice Spray-Proof Body & Key Barrel Ultra-High Strength Alarm Features: 120dB Alarm Auto Arm/Disarm Shock & Movement Sensors Removable Alarm Module

Mini Alarm System(Pack of 1)

$279.1

Mini Alarm System. Astra Astra777 Mini Alarm With One 2-Way Lcd Transmitter. Specs: One 2-Way 5-Button Lcd Transmitter; One 5-Button Code-Hopping Transmitter; Plug-In Dual Zone Piezo Sensor; Built-In Parking Light Relay; 2 Aux Channels; Remote Door Lock

Security Alarm System Valiant Security Alarm System 3090

$85.55

valiant 2-channel alarm system features two channels with two transmitters included selectable active or passive arming selectable switch or current sensing 6-tone 125 db siren remote panic adjustable 2-stage shock sensor with built-in warn away programmable transmitter coding selectable audible status indicator valet switch anti-scan code protection keyless entry starter kill defective zone bypass status led faulty sensor bypass parking light flasher power trunk release output negative trigger output for hood or trunk and intruder attempt memory provides great protection to your vehicle with 19-key features designed for the do-it-yourselfer with on-board relays make this super-easy to install auto parts warehouse has extensive valiant security alarm system catalogs.we are now offering free shipping on all valiant security alarm system orders over $50.00. our secure valiant security alarm system catalog is available every hour of everyday. shop with confidence for all your valiant security alarm system needs. valiant security alarm system are in stock and available today. save upto 60% off dealer price on your next valiant security alarm system purchase. our online catalog contains a wide selection of the oem and aftermarket parts you need at unbeatable prices

Ge Wirlss Alarm W/Progammable Keypad(Pack of 1)

$29.99

Ge 45117 Wireless Alarm With Programmable Keypad. Simple & Easy To Mount & Use; Alarm Sounds When Door Is Opened ; Chime Mode To Announce Visitors; 4-Digit Keypad Code Activates & Deactivates Alarm; Delay Feature Allows User To Enter & Leave Without Activ

Code Blue II Adult Manual Resuscitator, Case of 10

$678.99

Code Blue II Adult Manual Resuscitator This resuscitator’s versatile reservoir locations allow you to choose the resuscitation style of greatest comfort. The resuscitator features a valve system that delivers high FIO2s during all modes of operation and a swivel patient connector that reduces tracheal tube torque during hand off or transport. Includes tail bag reservoir and Adult Face Mask JV5250. Specifications: Ventilatory frequency: 37 to 43 bpm at 600mL VT. Stroke volume range: 900 to 1100mL one handed; 1000 to 1400mL two handed. Patient size: >30kg. Resuscitator bag volume: 1750mL . Delivered oxygen: 0.98 ±0.02 at 15L/min., 12 bpm, 600mL VT, controlled or spontaneous ventilation. Dead space:

General Alarm Plaque General Alarm Plaque

$10.94

General Alarm Plaque General Alarm Plaque Bernard Engraving Co. General Alarm Plaque – GENERAL ALARM PLAQUE

Smoke Fire Alarm Smoke & Fire Alarm

$16.94

Smoke Fire Alarm Smoke & Fire Alarm Fireboy Smoke Fire Alarm – SMOKE & FIRE ALARM

Bedside Alarm Clock

$6.95

Bedside Alarm Clock ELGIN BEDSIDE ALARM

Summit Refrigeration VLT650 Laboratory Chest Freezer, Temp Display, Alarm, Lift-Up Lid, White, Rev Door 4.0

$1232

Laboratory Chest Freezer, single-section, 4.0 cu. ft. capacity reversible door, -40 C operation, front-mounted lock, manual defrost, thermostatic control, temperature display, alarm lock, white cabinet & door finish, self-contained refrigeration, UL

Summit Refrigeration VLT1250 Laboratory Chest Freezer, Temp Display, Alarm, Lift-Up Lid, White, 12.0 cu ft

$1820

Laboratory Chest Freezer, single-section, 12.0 cu. ft. capacity -40 C operation, front-mounted lock, manual defrost, thermostatic control, temperature display, alarm lock, lift-up lid, white cabinet finish, self-contained refrigeration, s/s door, UL

Summit Refrigeration VLT1750 Laboratory Chest Freezer, Temp Display, Alarm, Lift-Up Lid, White, 17.0 cu ft

$2030

Laboratory Chest Freezer, single-section, 17.0 cu. ft. capacity -40 C operation, front-mounted lock, manual defrost, thermostatic control, temperature display, alarm lock, lift-up lid, white cabinet finish, self-contained refrigeration, s/s door, UL

Summit Refrigeration VLT2250 Laboratory Chest Freezer, Temp Display, Alarm, Lift-Up Lid, White, 22.0 cu ft

$2170

Laboratory Chest Freezer, single-section, 22.0 cu. ft. capacity -40 C operation, front-mounted lock, manual defrost, thermostatic control, temperature display, alarm lock, lift-up lid, white cabinet finish, self-contained refrigeration, s/s door, UL

Summit Refrigeration VLT850 Laboratory Chest Freezer, Temp Display, Alarm, Lift-Up Lid, White, SS Door, 7.5

$1673

Laboratory Chest Freezer, single-section, 7.5 cu. ft. capacity -40 C operation, front-mounted lock, manual defrost, thermostatic control, temperature display, alarm lock, lift-up lid, white cabinet finish, self-contained refrigeration, s/s door, UL

Summit Refrigeration VT125 Laboratory Chest Freezer, Temp Display, Alarm, Front Lock, White, 12.0 cu ft

$1680

Laboratory Chest Freezer, single-section, 12.0 cu. ft. capacity -30 C operation, front-mounted lock, manual defrost, thermostatic control, temperature display, alarm lock, white cabinet & door finish, self-contained refrigeration, UL

Summit Refrigeration VT175 Laboratory Chest Freezer, Temp Display, Alarm, Front Lock, White, 17.0 cu ft

$1883

Laboratory Chest Freezer, single-section, 17.0 cu. ft. capacity -30 C operation, front-mounted lock, manual defrost, thermostatic control, temperature display, alarm lock, white cabinet & door finish, self-contained refrigeration, UL

Summit Refrigeration VT225 Laboratory Chest Freezer, Temp Display, Alarm, Front Lock, White, 22.0 cu ft

$1995

Laboratory Chest Freezer, single-section, 22.0 cu. ft. capacity -30 C operation, front-mounted lock, manual defrost, thermostatic control, temperature display, alarm lock, white cabinet & door finish, self-contained refrigeration, UL

Summit Refrigeration VT65 Laboratory Chest Freezer, White, Rev Door, Temp Display, Alarm, 4.0 cu ft

$1106

Laboratory Chest Freezer, single-section, 4.0 cu. ft. capacity reversible door, -30 C operation, front-mounted lock, manual defrost, thermostatic control, temperature display, alarm lock, white cabinet & door finish, self-contained refrigeration, UL

Summit Refrigeration VT85 Laboratory Chest Freezer, White, Temp Display, Alarm, Self-Contained, 7.5 cu ft

$1533

Laboratory Chest Freezer, single-section, 7.5 cu. ft. capacity -30 C operation, front-mounted lock, manual defrost, thermostatic control, temperature display, alarm lock, white cabinet & door finish, self-contained refrigeration, UL

Alarm Clock – Gripper

$16.53

Alarm Clock – Gripper Alarm Clock – Gripper

Tags: code alarm manual, code alarm manual installation, code alarm manual pdf, code alarm manual remote start, code alarm manual sure start lx

No comments yet.

Car Electronics

Is Your Car Ready

Code Alarm Manual

Mobiles Secret Codes Magic

Leave a comment

Search

Recent Posts